Fluke233-ARemoteDisplayAutomotiveDigitalMultimeterKit

  • Fluke 233/A Remote Display Automotive Digital Multimeter Kit
  • Fluke 233/A Remote Display Automotive Digital Multimeter Kit
  • Fluke 233/A Remote Display Automotive Digital Multimeter Kit
  • Fluke 233/A Remote Display Automotive Digital Multimeter Kit

主要特性

  • 真有效值交流电压和电流,确保精确测量各种非线性信号
  • 可以测量高达 1000 V 的交流电和直流电
  • 可以测量高达 10A 的电流(20 A,持续 30 秒)
  • 10,000 μF 电容量程
  • 频率可达 50 kHz
  • 内置测温表,无需携带单独的仪器即可获取温度读数
  • 电阻、连续性和二极管测试
  • 低耗能无线技术允许把显示屏放在离测量点 10 米(33 英尺)远的地方,提高了测量灵活性。 无干扰的测量
  • 可拆卸的磁性显示屏可以方便地安放在容易查看的位置
  • 无需拿着多用表进行测量,可以改善对探头的关注度并提高了电气测量的安全性
  • 连接显示屏后可以用作传统的多用表
  • 当显示屏连接到多用表时,无线电发射器自动关闭
  • 自动关机功能最大化电池寿命
  • 最小值/最大值和平均值记录允许自动捕获异常情况
  • 测试连续性和二极管
  • 大型数字和背光方便读取数值
  • 电池寿命约为 400 小时
询价及预约演示

产品概述

What would you do if you could be in two places at once?

By simply sliding the wireless display out of the Fluke 233/A’s meter body, the technician can place the display where it is most easily seen—up to 10 meters (33 feet) from the point of measurement—while putting the meter in the best position to take measurements. The removable display has a magnetic back and flat bottom so it can be mounted or placed on any flat surface where it can be conveniently seen. When the display is attached to the meter body the Fluke 233/A operates as a conventional multimeter.

The detachable wireless display lets automotive technicians:

  • Find a comfortable position to view and record test data, even when the test location is hard to reach or in a dirty or noisy environment.
  • Attached test leads to brake lights while sitting in the driver seat, pressing the brake pedal and viewing the display.
  • Safely view underhood measurements on moving vehicles.
  • Separate the tasks of positioning the meter and reading test results, devoting full attention to each job—and working more safely.
  • Run tests and read results at a safe distance from high-voltage, high-current systems. The Fluke 233 is safety rated for use in CAT III 1000 V, CAT IV 600 V working environments, important for technicians working on hybrid vehicles.

Designed by Fluke engineers and manufactured at the Fluke Worldwide headquarters in Everett, Washington, the Fluke 233 is safety rated for use in CAT III 1000 V, CAT IV 600 V working environments. This is important for technicians working on hybrid vehicles, which routinely work with high-voltage, high-current systems not found on conventional vehicles.

型号

Fluke 233/A Kit
Fluke 233/A Remote Display Automotive Digital Multimeter Kit

产品规格

精度规格
直流电压 量程 0.1 mV 至 1000 V
精度 0.25% + 2
交流电压 量程 0.1 mV 至 1000 V
精度 1.0% + 3
直流电流 量程 1 mA 至 10 A
精度 1.0% + 3
交流电流 量程 1 mA 至 10 A
精度 1.5% + 3
电阻 量程 0.1 Ω 至 40 MΩ
计数 6000
电容 量程 1 nF 至 9999 μF
分辨率 1nF
频率 量程 5 Hz 至 50 kHz
分辨率 0.01Hz
温度 -40 °C 至 +400 °C
功率 AA 电池:三节用于主机;两节用于显示屏
电池寿命 400 小时
无线频率 2.4 GHz ISM 频带 10 米范围
安全等级 CAT IV 600 V、CAT III 1000 V
通用技术指标
基本功能 交流真有效值
量程变换 自动/手动
显示屏 背光灯
数据存储 最小/最大/平均值
其它功能 电池类型 AA 碱性电池
可拆卸显示屏
保修期和保护 安全等级 CAT IV 600 V/CAT III 1000 V
外部保护 橡胶包覆
保修期 三年
尺寸(高 x 宽 x 长) 5.3 x 9.3 x 19.3 cm (2.08 x 3.6 x 7.6 in)
重量 604 g (1.3 Ib)

资源