中国

VT04 可视红外测温仪维护组合套件

  • Fluke VT04 Visual IR Thermometer Maintenance Combo Kit
  • Fluke VT04 Visual IR Thermometer Maintenance Combo Kit
  • Fluke VT04 Visual IR Thermometer Maintenance Combo Kit
  • Fluke VT04 Visual IR Thermometer Maintenance Combo Kit
已停产

主要特性

  • Unlimited applications – See data sheet for powerful applications and details
  • Built-in digital camera – Every Fluke Visual IR Thermometer has a built-in digital camera
  • Exclusive thermal heat map blending overlay – With one button, blend digital images and thermal heat maps to instantly show the exact location of the issue
  • No training required - Fully automatic with built-in intelligence
  • True pocket size design – Less than half the size of an average infrared camera
  • SmartView® reporting software – Store up to 10,000 images per Gb on included SD card and make professional reports on included professional software
  • Automatic hot and cold spot trackers
  • Breakthrough affordability – Fraction of the cost of infrared cameras that require costly training and software
  • Powerful resolution with PyroBlend® Plus optics:
    • Best-in-class field of view: 28 ° x 28 ° (40% wider for tight spaces)
    • 4 times sharper images
  • Alarm and time lapse features:
    • Hi/Lo temperature alarm – Find hot spots in seconds with the alarm feature
    • Time lapse image capture – Automatically monitor equipment over time
    • Automated monitoring alarm – Automatically capture images after an alarm has been triggered
本产品已停产或重新分类

产品概述: VT04 可视红外测温仪维护组合套件

VT04 和 Fluke 1507 绝缘电阻测试仪非常适合用于排查故障和预防性维护应用。

产品规格: VT04 可视红外测温仪维护组合套件

Fluke VT04 可视红外测温仪

 
主要特性
内置数字摄像头
热图着色 有,5 种混合模式
成像光学系统 PyroBlend® Plus 光学系统* 相比 VT02,图像清晰度提高 4 倍
视场 28° x 28°
高/低温警报
时移图像拍摄
自动监控警报
电池类型 可充电锂电池
培训 无需任何培训
人机工程学特性 设计纤巧,口袋大小
冷热标记
一般 特点
电池使用时间 八 (8) 小时
温度测量范围 -10 °C 至 +250 °C(14 °F 至 482 °F)
温度测量精度 +/- 2 °C 或 +/- 2 %
温度测量 有,中心点测量
存储介质(微型 SD 卡) 四 (4) Gb 卡,每 Gb 的储存容量达 10000 张图像
红外光谱带 6.5 μm 至 14 μm
级别和范围 自动
对焦机制 免调焦,内置智能化功能,无需培训
对焦选项 - 独有的用户可选近焦距/远焦距 近焦距 < 23 cm (9 in);远焦距 > 23 cm (9 in)
尺寸 21 cm x 7.5 cm x 5.5 cm (8.3 in x 3 in x 2.2 in);< 350 g. (12.5 oz.)
文件格式 保存至 SD 卡的 .is2 格式。用户可在 Smartview 中制作专业报告或导出图像(BMP、DIB、GIF、SPE、FIF、SPEG、JPG、PNG、TIF 和 TIFF 格式)
安全及合规性 CFR47: 2009 Class A. Part 15 subpart B; CE: EN 61326:2006; IEC/EN 61010-1:2010
保修期 两 (2) 年

Fluke 1507/1503 绝缘电阻测试仪

 
交流/直流电压测量
精度 范围 600.0 V
分辨力 0.1 V
50 Hz 至 400 Hz ±(% 读数 + 位数) ± (2 % + 3)
输入阻抗 3 MΩ(标称),< 100 pF
共模衰减率(1 kΩ 不平衡) > 60 dB,直流,50 或 60 Hz
过载保护 600 V rms 或直流

 

接地连接电阻测量
范围/分辨率 20.00 Ω 0.01 Ω
200.0 Ω 0.1 Ω
2000 Ω 1.0 Ω
20.00 kΩ 0.01 kΩ
精度 ± (1.5 % + 3)
过载保护 2 V rms 或直流
开路测试电压 > 4.0 V, < 8 V
短路电流 > 200.0 mA

 

绝缘规格
测量值范围 1507 0.01 MΩ 至 10 GΩ
1503 0.01 MΩ 至 2000 MΩ
测试电压 1507 50 V,100 V,250 V,500 V,1000 V
1503 500 V, 1000V
测试电压准确度 + 20 %, - 0 %
短路电流 1 mA(标称)
自动 放电 放电时间 < 0.5 秒,C = 1 µF 或更少
带电电路指示器 在初始化测试前,如果终端电压 > 30 V,进行抑制测试
最大电容性负载 在 1 µF 以下的负载可操作
测量精度 50 V ±(3 % + 5)
100 V ±(3 % + 5)
250 V ±(1.5 % + 5)
500 V ±(1.5 % + 5)
1000 V 2000 MΩ 以下,±(1.5 % + 5);2000 MΩ 以上,±(10 % + 3)

 

通用技术指标
施加到任何端子的最大电压 600 V 交流有效值或直流
存放温度 -40 °C 至 60 °C(-40 °F 至 140 °F)
工作温度 -20 °C 至 55 °C(-4 °F 至 131 °F)
温度系数 温度 < 18 °C 或 > 28 °C(< 64 °F 或 > 82 °F)时,0.05 x(指定精度)/°C
相对湿度 10 °C 至 30 °C(50 °F 至 86 °F)时,0 % 至 95 %
30 °C 至 40 °C(86 °F 至 104 °F)时,0 % 至 75 %
40 °C 至 55 °C(104 °F 至 131 °F)时,0 % 至 40 %
振动测试仪 随机,2 g,5-500 Hz,依据 MIL-PRF-28800F 2 类仪器
撞击 按照 IEC 61010-1 第 2 版的规定,1 米跌落(1 米跌落测试,六面,橡木地板)
电磁兼容性 在一个 3 V/M 的射频磁场内,精确度 = 指定精度 (EN 61326-1:1997)
安全性 符合 ANSI/ISA 82.02.01 (61010-1) 2004, CAN/CSA-C22.2 NO. 61010-1-04,和 IEC/EN 61010-1 第 2 版,IV 类测量 600 V (CAT IV)
认证 CSA 按照标准 CSA/CAN C22.2 No. 61010.1-04;TUV 按照标准 IEC/EN 61010-1 第 2 版
电池 四节 5 号电池(NEDA 15A 或 IEC LR6)
电池使用时间 绝缘测试用途 室温条件下,新的碱性电池可供仪表进行至少 1000 次绝缘测试。这些标准结果是在将 1000 V 通过 1 MΩ 电阻的情况下测得的,工作周期为 5 秒钟开,25 秒钟关。
电阻测量 室温条件下,新的碱性电池可供仪表进行至少 2500 次接地连接绝缘测量。这些标准结果是在 1 Ω 电阻的情况下测得的,工作周期为 5 秒钟开,25 秒钟关。
尺寸 5.0 cm H x 10.0 cm W x 20.3 cm L (1.97 in H x 3.94 in W x 8.00 in L)
重量 550 g (1.2 lb)
防护等级 IP40
海拔 工作温度 2000 m CAT IV 600 V, 3000 m CAT III 600 V
非操作(存放) 12000 m
过量能力 110 % 量程
内含附件 TL224 测试导线,TP74 测试探头,夹子零件号为 1958654(红色)和 1958646(黑色),皮套和远程探头

型号: VT04 可视红外测温仪维护组合套件

Fluke VT04-Maint-Kit
Fluke VT04 Visual IR Thermometer Maintenance Combo Kit

包括:

  • VT04 可视红外测温仪
  • 1507 绝缘电阻测试仪