Fluke Calibration P3031 和 P3032 气动自重测试器
主要特性
- 压力范围达 2000 psi (140 bar)
- 读数准确度的 0.015%（0.008% 为可选）
- 细微压力控制用螺旋压机
- 活塞漂浮指示器
- 安装有可调节脚架的水平仪
- 系列 3 无磁性不锈钢砝码
产品概述: Fluke Calibration P3031 和 P3032 气动自重测试器
型号 P3031 和 P3032 配备了气体驱动油润滑活塞/套筒组件，可确保仪器的性能受污染或工作环境的影响更小。这些气体驱动总载重量测试仪不存在与常规高压气动总载重量测试仪相关的维护问题。供应气体直接作用于油液润滑活塞，因此对系统准确度不产生影响。
产品规格: Fluke Calibration P3031 和 P3032 气动自重测试器
Accuracy | |
| Accuracy* | ±0.015% of reading (±0.008% optional) |
| *Accuracy based on % of reading from 10% to 100% of the piston range when used in accordance with the corrections found on the calibration certificate. Below 10% ± (accuracy class) x 10% of the piston range. | |
Mass and PCU Materials of Construction | |
| Standard weight material | Series 3 non-magnetic austenitic stainless steel |
| Weight density | 7.8 g/cm³ |
| Optional fractional weights | Solution heat treated aluminum |
| Weight density | 2.7 g/cm³ |
| Models (P) P3031, P3032 (P & V) | Piston Material: Tungsten carbide Cylinder Material: Martensitic steel Coefficient of Expansion: 16.5 ppm/°C |
General | |
| Test port adaptors | 1/8, 1/4, 3/8 and ½ NPT or BSP |
| Instrument weight | 24 lbs |
| Instrument size | 17.5 W x 12 D x 8.5 H |
| Mass set weight (typical) | 65 lbs |
Minimum Standard Weight Increments | |
| P3016, P3031, P3032 | 1 psi, (0.1bar) |
Optional Fractional Weights | |
| P3014, P3015, P3025 Pressure | 0.1 psi (0.01 bar) |
Built-in Hand Pumps | |
| Pressure mode | Max pressure 300 psi (20 bar) |
| Vacuum mode | To 90% vacuum |
Operating Fluid for Liquid Lubricated Models | |
| 55-655 | mineral oil (standard) |
| Krytox | for oxygen-safe applications (optional) |
Options | |
| PressCal Software | Windows-based software program that allows users to easily apply all necessary corrections to enhance the deadweight tester performance. Calibration details are then stored and/or used to automatically create a calibration certificate. PressCal is provided as standard with all 0.008% instruments. |
| Krytox | As operating fluid for liquid lubricated gas operated models. |
型号: Fluke Calibration P3031 和 P3032 气动自重测试器
P3031-KGCM2
P3031-KGCM2 Liquid Lubricated Gas Operated Model
压力范围为 1 到 70 kgf/cm
压力范围为 1 到 70 kgf/cm
P3031-KPA
P3031-KPA Liquid Lubricated Gas Operated Model
压力范围为 100 到 7,000 kPa
压力范围为 100 到 7,000 kPa
P3031-MPA
P3031-MPA Liquid Lubricated Gas Operated Model
压力范围为 0.1 到 7 Mpa
压力范围为 0.1 到 7 Mpa
P3032-BAR
P3032-BAR Liquid Lubricated Gas Operated Model
压力范围为 1 到 140 bar
压力范围为 1 到 140 bar
P3032-KGCM2
P3032-KGCM2 Liquid Lubricated Gas Operated Model
压力范围为 1 到 140 kgf/cm
压力范围为 1 到 140 kgf/cm
P3032-PSI
P3032-PSI Liquid Lubricated Gas Operated Model
压力范围为 10 到 2,000 psi
压力范围为 10 到 2,000 psi
P3032-KPA
P3032-KPA Liquid Lubricated Gas Operated Model
压力范围为 100 到 14,000 kPa
压力范围为 100 到 14,000 kPa
P3032-MPA
P3032-MPA Liquid Lubricated Gas Operated Model
压力范围为 0.1 到 14 Mpa
压力范围为 0.1 到 14 Mpa
P3031-PSI
P3031-PSI Liquid Lubricated Gas Operated Model
压力范围为 10 到 1,000 psi
压力范围为 10 到 1,000 psi
P3031-BAR
P3031-BAR Liquid Lubricated Gas Operated Model
压力范围为 1 到 70 bar
压力范围为 1 到 70 bar
